Payment & Shipping Terms:
|Size (discharge):||2" - 12"||Capacity:||6-2600 M3/h|
|Head:||2.4m-118 M||Handling Solids:||0-260 Mm|
|Material:||High Chrome Alloy Wear Resistant Alloy Or Rubber|
65QV-ZP Vertical Slurry Pump is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance.
65QV-ZP vertical sump pumps are available in various standard lengths to suit common sump depths, offers a wide range of configurations allowing the pump to be tailored to a specific application.
Wetted components are available in a wide range of alloys and elastomers. They are ideally suited for handling abrasive and corrosive liquids and slurries while submerged in sumps or pits.
Size (discharge): 40mm to 300mm
Capacity: 7.28-1300 m3/h
Head: 3m-45 m
Handing solids: 0-79mm
Materials: High chrome alloy or anti-corrosion rubber
Matching power P
Wet parts of type ZP pump are made of abrasion-resistant metal.
All parts of type ZPR pump immersed in liquid are lined with rubber outer liner. They are suited to transport no-edge angle abrasive slurry.
The standard ZP(R) pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.
HEAVY DUTY WET END
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.
COLUMN AND DISCHARGE PIPES
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.
VERSATILE DRIVE OPTIONS
ZP(R) pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.
ZP(R) pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.
"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.
ZP(R) Performance Table
|ZP/ ZPR CLEAR WATER PERFORMANCE|
|LINER||IMPEL||(m 3 /h)||(I/S)|
|ZP-40PV||15||M||M or RU||19.44~43.2||5.4~12||4.5~28.5||1000~2200||40|
|ZP-200SV||110||M||M or RU||189~891||52.5~247.5||6.5~37||400~850||64|
|ZP-250TV||200||M||M or RU||261~1089||72.5~302.5||7.5~33.5||400~750||60|
★ Minerals processing
★ Coal preparation
★ Chemical processing
★ Effluent handling
★ Sand and gravel
★ Abrasive and/or corrosive slurries
★ Large particle sizes
★ High density slurries
★ Heavy duties demanding cantilever shafts
Life Photos for Shipping: